OSMO Stone Coat

OSMO Stone Coat is a special coating with penetrating performance that was especially developed for stone, concrete, and brick. It gives stone excellent water repellency, oil repellency, and dirt and stain resistance.

OSMO Stone Coat is a special coating that is blended with a special fluoropolymer to give it high penetration performance. After it is absorbed by the stone or concrete, it reacts with the silica in the stone and hardens. This forms an excellent coating block layer inside the stone with high water and oil repellency performance. This is completely different from conventional stone coatings that only form a coating layer on the surface. In other words, there is a physical action. For example, it will not be worn off and disappear in a short time by people’s shoes or car tires!

Characteristics

Tough water and oil repellency performance
It has excellent water and oil repellency and dirt and stain resistance.

Algae and mold prevention effect
It has excellent weather repellency and is effective against algae, mold, and efflorescence. Another characteristic is that it is very easy to peel off chewing gum, adhesive paper, etc.

Good texture after coating
The expression and texture of the surface is not lost after application.

Phenomenal long life effect
The weather repellency testing results were an amazing 8 years! Even under differing weather and usage conditions the durability performance is expected to last 3 to 5 years.

Water based for good workability
OSMO Stone Coat is a water based coating and thus has an environmentally friendly design.

It has excellent water and oil repellency and dirt and stain resistance.

Base materials that can be treated

Materials that can absorb water, such as stone, concrete, and brink.
For example, tombstones, outdoor structures made of stone (monuments, stairs, walls, stone walls, roads, etc.), train station platforms, toilet floors, exposed concrete walls and floors, marble floors and walls, etc., as well as the interior of tunnels, in other words, any material made of stone or concrete can be treated.

Application method

The coating is applied using a paint brush or roller. Spray guns can also be used.
The application method is really easy! It is just applied using a paint brush, roller, or spray gun. OSMO Stone Coat : Dilute with water 3 to 6 times the amount of coating. In addition, this is a water based coating, so it was designed to be very environmentally friendly. The water and oil repellency performance is realized several minutes after application. Further, there is almost no change to the texture after application.

OSMO Stone Coat : Standard coating conditions

Recommended dilution ratio / OSMO Stone Coat : Water = 1 : 6
OSMO Stone Coat is a water based special coating.
It can be diluted by adding an amount of water 3 to 6 times that of the coating.
To determine the dilution ratio, check the actual application conditions and adjust as necessary.

Standard application amount : 100 ± 30g /㎡
※ This depends on the nature of the application surface.

Drying: Approximately 30 minutes at room temperature
※ This depends on the weather conditions.

OSMO Stone Coat Coating Precautions

◆Coating environment: Avoid use in environments with poor ventilation.
◆Preparation: Use a power wash or other means to sufficiently remove any oil, water, or dirt from the bare surface.
◆Use repair mortar to repair any chips or cracks in the base material ahead of time.
◆Coating: Make sure the surface to be coated is completely dry.
◆Drying: The water and oil repellency performance will occur several minutes after coating. This occurs especially quickly at warm temperatures and in good weather.
◆The reactivity is very weak for calcium carbonate based materials (lime, stucco, etc.), so it may take several days for sufficient performance to be realized.
◆Storage: Store the coating in a cool, dark location.
◆Handling precautions: Use large amounts of water to wash off any coating that comes into contact with the body.

Application Technique for OSMO Stone Coat

1Application using a brush / roller / spray gun
Please use a brush, roller, or spray gun.
The paint is water-soluble and is hence environmentally friendly.
The material will acquire water/oil-repellent properties in a few minutes after application.
Application of the coating does not result in any observable change to the material’s texture and appearance.

2Standard application conditions
[ Recommended dilution ratio ] OSMO Stone Coat : water = 1 : 6
OSMO Stone Coat is a water-based special coating.
Water can be used to dilute the coating 3 to 6 times.
Please adjust the dilution rate accordingly after checking the results of application.
Standard amount of coating required : 100 ± 30g /㎡ ※ Varies with the material
Time to set: around 30 minutes at room temperature
The time required to set will vary according to prevailing weather conditions.

3Notes regarding the application of product
Please avoid using the product in a place without adequate ventilation.
Ensure that oil, water, dirt, and other impurities have been sufficiently removed from the material’s surface using high-pressure cleaning, etc., before use.
Please repair all cracks and other defects on the base material using a mortar, etc., before use.
Please ensure that the surface of the material is dry before application.
The material will acquire water/oil-repellent properties in a few minutes after application (the results will be more pronounced on a warm and clear day.)
For calcium carbonate materials (e.g. lime and plaster), the desired properties may take up to several days to fully develop due to the material’s low reactivity.
Storage: Please store the product in a cool, dark location.
If the product comes into contact with your skin, rinse immediately with plenty of water.

OSMO Stone Coat : 200g / 500g / 1000g
Use detergent to remove any dirt and oil.
Rinse away the detergent with water.
After the material’s surface has dried, apply OSMO Stone Coat using a brush, roller, or spray gun.
Before application.
There is no observable change to the texture or appearance of the material after application.
Try splashing water on it!

The price

OSMO Stone Coat 200g : 16,800JPY

OSMO Stone Coat 500g : 38,000JPY

OSMO Stone Coat 1kg : 68,000JPY


Cure agent : 1.5kg Shipping charges : Not included.
Shipping charge / as hazardous goods